MC(AIA) with XHHW-2 AL Inners armoured cable

 600 Volt.AluminumAlloy Conductors, XHHW-2AL asInners,with Bare Grounding Conductor, Aluminum Alloy Interlocked Armor,

Low-Temp, Oil, Sunlight Resistant, Flame Retardant, Metal Clad Cable

APPLICATIONS

Type MC cable complies with the following:

•Permitted use for service, feeders and branch circuits in residential, commercial, industrial, and multi-residential buildings;

•Acceptable for power, lighting, control, and signal circuits;

•Utilized for indoor or outdoor applications, and allowable for concealed or exposed systems;

•Permitted in wet locations per USA NEC 330.10(A)(11)(a);

•Allowable in assembly occupancies (USA NEC 518.4);

•Permissible in theaters, audience areas of motion pictures, television studios, and similar locations (USA NEC 520.5);

•Suitable for installation under raised floors for IT equipment (USA NEC 645.5) ;

•Allowable installations in approved raceways and cable trays (USA NEC 392);

•Permitted in Class I Div. 2, Class II Div. 2, and III Div. 1 Hazardous Locations and listed for use in UL 1, 2, and 3Hour Through-Penetration Firestop Systems;

STANDARDS

Morn’s Type MC Cable complies with the following:

• UL 44

• UL 1569

CONSTRUCTION

Conductor	•Strandedcompressed/compactedAA-8000 series aluminum alloy
Insulation	•Cross-linked polyethylene (XLPE) 90°C rated
Ground	•Bare aluminum alloy grounding conductor
Assembly	•Separator tape
Armor	•Aluminum Alloy Interlocked Armor (AIA)

TECHNICAL PARAMETER LIST

NOTE: Other conductor sizes are available upon request.